When Need to Replace ATV CV Joint Axles : 3 Signs of Bad Front or Rear Axle Shaft

Riding an ATV is a great experience that can be enjoyed by the entire family. It's exciting, and it teaches respect on many levels, including for the environment, habitat and even respect for others.It’s the most popular sport in USA.Good CV joint axles are essential for transferring the torque from the transmission to the drive wheels at a stable speed when you are riding your Yamaha Rhino.If not,it’s really a big headache.Have you known how to identify bad front axles or rear ones of your Polaris ranger ?

Signs of Failing Front or Rear Axle Shaft

1. Noise

Clicking or popping during tight turns indicates possible outboard cv joint damage.

2.Vibration

Shudder or clunking when accelerating or decelerating indicates possible inboard cv joint damage.This symptom is more apparent than clicking.Noise and vibration when cornering can just indicate a problem in the CV joint, which is a cheaper problem to cure, but it still needs to be dealt with promptly in case there is a larger issue at hand. It is much better to be vigilant with repairs than assuming the problem is minor, since a malfunction with a drive axle while driving could be dangerous. Also, when the axle is in very bad condition it will feel as if you’re driving a vehicle with a warped wheel.

3. Movement

With the vehicle jacked up and supported, move the drive axle up and down. There should be no excessive movement (no more than ½ inch or so). If you do feel movement, your drive axle is too worn and needs replacement as soon as possible. This is common especially when the vehicle has a great deal of mileage on the clock, typically more than 100,000 miles.

If you keep these three common symptoms in mind while driving, catching a drive axle problem early shouldn't be hard.

How can I replace my cv joint axles?

Before deciding to replace cv joint axles, look for defects in other associated components. If the related components show any signs of wear, such as boots,you could just buy more high-quality boots in you local repair shop then install them,it is better to replace the entire axle assembly.

Here are the steps to install axles:

1) Raise the end of the atv with jack stands; front end for front axle and rear end for rear axle.

2) Remove the axle nut in the wheel.

3) Uninstall the suspension and steering components.

4) Remove the shaft.

5) Install the axle.

6) Install the shaft, the suspension and steering components, and the axle nut back in their respective places.

If a CV joint itself is worn out, it cannot be repaired and it's time to replace a new one and takes about an hour to complete the installation.A brand new and high quality cv joint axle can be purchased at Amazon or another auto parts online stores such as hexautoparts ,buyautoparts ,carautoparts. They are for between $50.00 and $80.00 ,is it not very expensive,right ? Try them, deserve it.

Hope this article can help you how to identify axle are failing and need repair .More information about Automotive you can keep eyes on my blog, which aim to offer profession tutorials for most of people know automotive aftermarket. Also you can easily access a lot of information on car repair and maintenance here, fixing and repairing minor faults in vehicles is a norm.